TECHNICAL BULLETIN INDEX
                              Sorted by Bulletin Number
                                      04/03/86

  No.     Catalog  Description                                       Rev. Date
==============================================================================
II:001    26-4002 DRIVE O - Proper termination.                       03/07/83
II:002    26-4002 64K RAM - Proper RAM board jumper configurations.   03/08/83
II:003    26-4002 VIDEO - Discussion of general video theroy.         04/28/83
II:006    26-4002 FDC - Zener diode to correct thermal failure.       03/09/83
II:005    26-4002 VDC board causing video generator PCB to fail.      03/09/S3
II:006    26-4160 CDC - Stepper motor always being enabled.           03/09/83
II:007    26-4160 CDC - Uisk binding , intermitcanc drive not ready.  03/10/83
II:008    26-4002 Video PCB - Proper heat sinking of Q4 and Q7.       03/11/83
II:009    26-4002 FDC - Modification for satellite board.             04/13/83
II:010    26-4002 FDC - XENIX thinks drive 0 is double sided.         02/18/83
II:011    26-4002 Motherboard causing apparent power supply problems  03/11/83
II:012    26-4160 Wiring differences between power supplies.          04/04/83
II:013    26-4002 FDC - C17 installed backwards.                      03/11/83
II:014    26-4002 RCA Video - Vertical retrace line can be removed    03/11/S3
II:015    26-4002 Shugart - Proper tightening af stepper motor screw  03/11/83
II:016    26-4002 Shugart - Correcting Boot Error BC.                 03/11/83
II:017    26-4002 CPU - Bisync modification and testing procedure.    03/14/83
II:018    26-4002 VDC - To correct dual addressing (Rev. A and B).    03/14/83
II:019    26-4002 FDC - Discussion of revised FDC board.              03/15/83
II:020    26-4002 Shugart - Modification to correct boot errors.      03/16/S3
II:021    26-4002 FDC - Won't format past track 43.                   03/16/83
II:022    26-4002 Shugarc - Proper adjustment of sector sensor pot.   03/17/83
II:023    26-4002 VDC - Unexplained keyboard entries and/or lockup.   03/18/83
II:024    26-4002 VDG - Characters intermittently appearing on video  03/21/83
II:025    26-4002 CPU - To correct power on reset problem.            03/22/83
II:026    26-4002 CPU - Enhanced DMA modification instructions.       03/22/83
II:027    26-4002 FDC - Side select signal to external drives gone.   03/22/83
II:028    26-4002 FDC - To correct head load termination.             03/23/83
II:029    26-4002 Procedure for adjusting AA11081 power supply.       04/01/83
II:030    26-4002 Termination, jumpering, and test points for drives  01/24/84
II:031    26-4002 Jumpering for pullups to prevent memory errors.     03/23/83
II:032    26-4002 CPU - Possible missing wait state jumpers.          03/23/83
II:033    26-4002 CPU - Checksums for Model II/16 Boot ROM.           03/23/83
II:034    26-4160 CDC - Raw Data adjustment procedures.               03/29/83
II:035    26-4002 Shugarc - Wiring assembly for termination.          03/31/83
II:036    26-4002 Shugart - Schematics and component layouts for PCB  03/31/83
II:037    26-4002 Precautions for the modified power supply.          03/31/83
II:038    26-4002 Keyboard - Check keyboards for anti-static foil.    04/01/83
II:039    26-4002 TPI - Errors in drive 0, no operation in Expansion  06/16/S3
II:040    26-4002 Schematic corrections on the KeyTronic keyboard.    04/26/84
II:041    26-4002 To correct keyboard power on reset problems.        05/17/84
II:042    26-4002 Installing Multi-termina1 interface into Model II.  05/28/85